How to Guide

III. HOW TO INSERT THE TILED DRAIN GRATE INTO THE

TILED SHOWER PAN FLOOR: (See Figs. 1 & 3)

1. Insert the Rubber Bumpers into the Tileable Drain

Grate side holes by inserting them into the holes

until they are locked in place (Fig. 1).

2. Slide the tiled drain grate into the shower pan

Drain Recess, first by compressing the side of the

grate with the Rubber Bumpers against the wall

of the shower pan Drain Recess (Fig. 3).

3. Finally, slide the other side of the tiled drain grate

into the shower pan Drain Recess.

IV. HOW TO REMOVE THE TILED DRAIN GRATE FROM

THE DRAIN RECESS: (See Fig. 4)

1. Insert your fingers or an Allen wrench into the

space between the tiled drain grate and the Drain

Recess wall (i.e., either between E and F or

between G and H), carefully lift out one side of

the grate and grab it with both hands and then

carefully remove the other side by lifting the

entire grate with your hands.