User's Manual
WM96 User Manual Version 1.0 Page 1
Factory Default Setting:
• Keyboard is in macOS mode
• Power switch on the underside of the keyboard is turned off
• 2.4GHz RF Receiver is paired with the keyboard
Toggle between macOS mode and Windows mode
You must be in macOS Mode to use Mac hot keys. You must be in Windows
Mode to use Windows hot keys.
Enter macOS mode LEDs status Enter Windows mode LEDs status
Hold Fn + A
for 3 secs
This LED will be
ON for the
macOS mode
Hold Fn + M
for 3 secs
This LED will be
OFF
for the
Windows mode
Battery
• 5 hours is required to fully charge the internal battery. Charge
the battery once a month for at least 2 hours.
• When the middle LED blinks along with any key presses, the battery
power is low and charging is required.
• When the keyboard is connected to a USB host, the keyboard is
automatically switched to USB mode.
• To conserve battery power, all LEDs are deactivated in wireless
mode. Hold the Fn key to see all the current status of LEDs.
Wireless connection
ON OFF
(Power Switch on the underside of the keyboard)