User's Manual

WM68 User Manual Version 1.1 Page

 Factory Default Setting:

• Keyboard is in macOS mode

• Power switch on the underside of the keyboard is turned off

• 2.4GHz RF Receiver is paired with the keyboard

 Toggle between macOS mode and Windows mode

You must be in macOS Mode to use Mac hot keys. You must be in Windows

Mode to use Windows hot keys.

Enter macOS mode LEDs status Enter Windows mode LEDs status

Hold Fn + A

for 3 secs

Space bar Left LED

flashing in Blue color

Hold Fn + M

for 3 secs

Space bar Left LED

flashing in Blue

color

Anytime when holding the Fn key alone:

• Left indicator LED at Space bar turn ON with Blue color means the keyboard is in

MAC mode

• Left indicator LED at Space bar turn OFF means it is in Windows mode.

• LED at Caplock will be ON if the Caplock mode is ON. Otherwise, the LED will be

OFF.



Battery

• 5 hours is required to fully charge the internal battery. Charge

the battery once a month for at least 2 hours.

• When Caplock LED blinks along with any key presses, the battery

power is low and charging is required.

• When the keyboard is connected to a USB host, the keyboard is

automatically switched to USB mode.

• To conserve battery power, all LEDs are deactivated in wireless

mode. Hold the Fn key to see all the current status of LEDs.

PAGE 1
 Factory Default Setting: • • • Keyboard is in macOS mode Power switch on the underside of the keyboard is turned off 2.4GHz RF Receiver is paired with the keyboard  Toggle between macOS mode and Windows mode You must be in macOS Mode to use Mac hot keys. You must be in Windows Mode to use Windows hot keys.
PAGE 2
 Wireless connection ON OFF (Power Switch on the underside of the keyboard) RF and Bluetooth pairing WM68 User Manual Version 1.
PAGE 3
Switch between Wired and Wireless mode  Macro editing mode 1. Press Fn + Backspace to enter Macro Editing Mode, the LED at Esc key will blink. 2. Select any of the keys [ Q/W/E/R/T/Y/U/I/0/P ] to be programmed as the macro hot key. 3. You can press Fn + [ or ] to add a delay between each character 4. Press Fn + Enter to save the macro. 5. Repeat steps 2 to 4 to program more macros 5. Once completed, press Fn + Backspace to exit Macro Editing Mode 6.
PAGE 4
 Shortcut keys * Requires setup in System Preferences WM68 User Manual Version 1.
PAGE 5
** Press Fn + Spacebar to switch the Function keys to Shortcut keys. Press again to toggle back FCC warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.