User Manual

4
SAFETY INFORMATION AND INSTRUCTIONS
Please take the time to read and follow safety instructions in this Manual
carefully. It will help you to use your new Wolverine® product properly and
enjoy its features more.
To reduce the risk of fire or electric shock, do not expose this product to
rain, moisture, water dripping or splashing. Use care not to spill liquids
into any part of the device. In the event that water or other liquids entered
the interior, turn off the device immediately. Continue use of the device
when wet, can cause failure and/or fire hazard.
.
Do not drop or handle too aggressively as it may cause damage to the
device. Warranty will be voided if the device is mishandled or misused.
Always place device on a flat level surface and avoid places where may
be subjected to strong vibration.
Do not handle the device with wet hands. Doing so may cause electrical
shock and damage the device.
Do not place the device close to any equipment generating strong
electromagnetic fields. Exposing to strong magnetic fields may cause
device malfunction.
Do not place or store device near heat source such as radiators, heat
registers, stoves that produce heat.
Clean device with dry cloth. Do not use abrasive clothes, thinner, alcohol,
or other chemical solvents, because they may damage the finish or
cosmetics.
Do not block ventilation openings which may cause device to overheat.
Prot ect the power cord from being walked on or sharp-pinched,
particularly at plugs and the point where they exit from the device.
Only use attachments/accessories specified by the manufacturer. If
power adapter is needed, use the power adapter supplied in the package.
Using wrong power adapter may short the device and cause fire hazard.
Unplug this product during lightning storms or when unused for long
periods of time.
There is a risk that moisture may have condensed in the device when
environmental temperature rapidly changed, which can cause damage to
the device. To avoid condensed moisture damage to the device, allow it
stand at room temperature for 2-3 hours before use. This will help
moisture to evaporate and prevent unnecessary damage.
Under no circumstances should user try to repair or modify the device or
accessories. Opening the enclosure may expose you to high voltages or
other hazards. Unauthorized alterations may compromise safety,
regulatory compliance, and system performance, and will void the
warranty.
.
.
.
.
.
.
.
.
.
.
.