Instruction manual

B. Using WEB Interface

Start your web browser on your computer and search for the IP address shown on WorldRadio’s LCD screen under

Device Status / Software address (IP); as an example, if your IP is 192.168.1.15, then enter http://192.168.1.15 on

your computer to start the WorldRadio DMP-User Interface.

Check your WorldRadio Device IP from your WorldRadio following the procedure below.

Example:

 Only when the Profile Management is enabled, you will be prompted to Edit Profile. Select one of the three

Profiles for editing. Their default names are Profile 1, Profile 2 and Profile 3, but they can be renamed, using your

WorldRadio DMP-User Interface. The device name can also be changed using the WorldRadio DMP-User

Interface.

 Your WorldRadio DMP-User Interface cannot be used until your WorldRadio has been set up.

PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com