User manual

6
.
Power: Power on/off.
.
Left/Mirror and Right/Flip: Highlight the selection to left/up or
right/down; mirror or flip image in "Convert" mode.
.
Convert/Mode: Convert film to digital image in "Convert" mode.
Press Mode key one time to bring back the previous menu. Press
Mode key twice any time to go back to Home Menu (start menu).
.
OK/Enter key: Confirm and enter the selection
Functions of Keys
C
OK/Enter
Power
Convert/Mode
Left/Mirror
Right/Flip
OK
7
Connect F2D Mighty to TV Screen to View Images on
TV
If your TV set equipped with RCA composite ports that accept video-in
signal, you can view converted images on TV screen instead from the
F2D Mighty viewer.
Change your TV set INPUT to appropriate source. Plug the 3.5 mm end
of the RCA cable to TV OUT port located at the back of F2D Mighty,
and plug RCA end (white or yellow connector) to VIDEO-IN (yellow)
port of the TV set. The viewer of the F2D Mighty will turn dark, menu
and images will appear only on TV.