Technical Specifications

TECHNICAL DATA WOL-19
RAINCOAT
®
ONE COAT TRANSPARENT STAIN
Rust-Oleum Corporation Form: GDH-700
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 031517
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
ONE COAT TRANSPARENT STAIN
Resin Type
Acrylic Copolymer
Pigment Type
Transparent Iron Oxides
Solvents
Water
Weight
Per Gallon
8.40-8.60 lbs.
Per Liter
1.01-1.03 kg
Solids
By Weight
16.7-19.0%
By Volume
15.8-16.5%
Volatile Organic Compounds
<150 g/l (1.25 lbs./gal.)
Recommended Dry Film Thickness (DFT)
Per Coat
1.0 mils
(25µ)
Wet Film to Achieve DFT
5.5 mils
(137.5µ)
Practical Coverage at Recommended DFT
(assumes 15% material loss)
Approximately 225 sq.ft./gal
(5.5 m
2
/l)
Dry Times @ 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
1 hour
Light Traffic
24 hours
Replace Furniture
48 hours
Full Cure
7 days
Protect from Rain
24 hours
Shelf Life
3 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.