Use and Care Manual
TECHNICAL DATA
WOL-16
DURASTAIN
®
ONE COAT SEMI-TRANSPARENT STAIN
3
Form: GDH-697
Rev.: 020921
PRODUCT APPLICATION (cont.)
COVERAGE
Approximately 250 square feet per gallon. Depends on the
applicator and the porosity of the wood.
CLEAN-UP
Clean up drips or spatters with water IMMEDIATELY, as
dried stain is very difficult to remove. Clean up tools and
equipment immediately after use with mild soap and fresh
water. If dried, use mineral spirits or lacquer thinner.
STORAGE
KEEP FROM FREEZING. Close container when not in use.
Dispose of empty cans or unused portion in accordance
with local, state and federal regulations.
MAINTENANCE
It is recommended to periodically clean using Wolman Deck
Wash or a mild, non-abrasive soap and water mixture to
keep the coating grime-free and looking its best.