Technical Specifications

TECHNICAL DATA WOL-16
DURASTAIN ONE COAT SEMI-TRANSPARENT STAIN
Rust-Oleum Corporation Form: GDH-697
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 052418
Vernon Hills, Illinois 60061 www.rustoleum.com
PHYSICAL PROPERTIES .
ONE COAT SEMI-TRANSPARENT STAIN
Resin Type
Modified Alkyd/Acrylic Blend
Pigment Type
Iron Oxides and Mica
Solvents
Water
Weight
Per Gallon
8.5-8.6 lbs.
Per Liter
1.0 kg
Solids
By Weight
22.0-22.9%
By Volume
19.4-20.2%
Volatile Organic Compounds
<100 g/l (0.83 lbs./gal.)
Recommended Dry Film Thickness (DFT)
Per Coat
1.0-1.5 mils
(25-37.5µ)
Wet Film to Achieve DFT
5.0 -7.5 mils
(125-187.5µ)
Theoretical Coverage at 1 mil DFT (25µ)
311-324 sq.ft./gal.
(7.7-8.0 m
2
/l)
Practical Coverage at Recommended DFT
(assumes 15% material loss)
Approximately 250 sq.ft./gal
(6.2 m
2
/l)
Dry Times @ 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
1 hour
Light Traffic
24 hours
Replace Furniture
48 hours
Full Cure
7 days
Protect from Rain
24 hours
Shelf Life
3 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.