Technical Specifications

TECHNICAL DATA
WOL-07
DECKSTRIP
®
ASR
ACRYLIC STAIN REMOVER
2
Form: GDH-805
Rev.: 060518
PRODUCT APPLICATION (cont.)
Rinse Pressure Wash:
Pressure wash using a 40° tip and 1,500-2,500 psi to
prepare pressure-treated wood and hardwood. Use 500-
1,000 psi to prepare Cedar and Redwood. Move lengthwise
with boards to avoid cut marks across grain.
Repeat steps until entire surface has been stripped. When
finished, rinse surrounding grass and plants thoroughly.
Rinse Brush and Hose:
If pressure washing cannot be employed, vigorously scrub
surface with a stiff, synthetic, short-bristle broom or brush for
several minutes using moderate pressure. After brushing,
rinse thoroughly with a garden hose, using the highest
pressure nozzle setting available. On a vertical surface,
continually rinse stripped areas to avoid streaking. Rinse
any wood fibers off surrounding surfaces immediately.
When dry, surface should appear clean, bright and free of
previous coating.
Repeat steps until entire surface has been stripped. When
finished, rinse surrounding grass and plants thoroughly.
Note: After stripping Cedar, Redwood or exotic hardwoods,
black tannin stains may rise to the surface and give wood an
overall darkened appearance. If this occurs, treat affected
areas with Wolman Deck & Fence Brightener liquid
concentrate to restore the natural wood color. DeckStrip
ASR is not designed to remove tannin bleed stains.
HANDLING AND STORAGE
Clean Up:
Clean tools and equipment immediately after use with soap
and water. Use water or vinegar-soaked rag to wipe off any
drips or spills on unintended surfaces immediately.
Safe Handling:
During preparation and application, wear rubber or plastic
coated gloves and safety goggles. If applying with a
sprayer, wear a NIOSH-approved full-face respirator with an
organic vapor cartridge and N-95 pre-filter. Care should be
taken to cover any exposed aluminum surfaces to prevent
discoloration, as this product is corrosive to metal.
DO NOT MIX WITH ANY OTHER PRODUCTS, especially
those containing chlorine or bleach (sodium hypochlorite).
Rinse grass and plants with water after exposure.
PRECAUTIONS
Precautions:
DANGER! MAY BE FATAL IF SWALLOWED. CAUSES
SEVERE BURNS. CONTAINS SODIUM HYDROXIDE.
May be harmful if swallowed. Causes eye and skin irritation.
Prevent contact with eyes and skin. During preparation and
application, wear rubber or PVC gloves and safety goggles.
Wash thoroughly after handling. May cause respiratory and
throat irritation. Do not breathe spray mist. If applying with a
sprayer, wear a properly fitted, NIOSH approved respirator.
Use only with adequate ventilation.
KEEP OUT OF REACH OF CHILDREN.