Technical Specifications

TECHNICAL DATA
DECKSTRIP STAIN & FINISH REMOVER
Rust-Oleum Corporation Form: GDH-930
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 120817
Vernon Hills, Illinois 60061 www.rustoleum.com
PHYSICAL PROPERTIES .
Physical Properties
Liquid Concentrate
Active Ingredient
Sodium Hydroxide
Weight
Per Gallon
8.84 lbs.
Per Liter
1.06 kg
pH
13 minimum
Practical Coverage
Depending on wood age and species, surface porosity and method of application, one (1) gallon
of solution covers approximately 150 sq. ft.
Application Parameters
50°F (10°C)
Dry Time
Allow wood to dry thoroughly before applying a water based finish. Allow a minimum of 24 hours
before applying oil based stain or finish.
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.