Instructions

~ 72 ~
THE APPLIANCE DOES NOT WORK AT ALL.
1. The plug of the appliance is not
connected to the socket.
1. Connect the appliance to the mains
properly.
2. The plug has become loose.
2. Check the plug.
3. The socket is not supplied with
energy.
3. Check the corresponding socket by
connecting it with another appliance.
4. The fuse is switched off.
4. Check the fuse box.
5. The voltage is too low.
5. Compare the data on the model plate
with the data of your energy supplier.
LIGHT IS ON BUT MOTOR DOES NOT WORK.
1. Incorrect energy supply.
1. Check the energy supply.
2. Ventilation damper blocked.
2. Remove the blockage.
3. Motor mounting defective.
3. Replace the motor.
ABNORMAL MOTOR-SMELLS.
1. Motor defective.
1. Replace the motor.
SMEAR OF OIL.
1. One-way valve is leaky.
1. Seal the one-way valve.
APPLIANCE VIBRATES.
1. Motor housing not properly fixed.
1. Fix the motor housing properly.
2. Hood not properly fixed.
2. Fix the hood properly.
3. Metal supports not properly adjusted
and fixed.
3. Adjust and fix the metal supports
properly. They must stand flat and
firm on the floor / bottom of the
built-in cabinet.
MALFUNCTION
POSSIBLE CAUSE
MEASURE
INSUFFICIENT EXTRACTING CAPACITY.
1. Too much draught because of open
doors and / or windows.
1. Close the doors / windows.
APPLIANCE IS UNSTABLE.
1. Screws are not firmly tightened.
1. Tighten the screws.
2. Metal supports not properly adjusted
and fixed.
2. Adjust and fix the metal supports
properly. They must stand flat and
firm on the floor / bottom of the
built-in cabinet.