Instructions

~ 53 ~
B
EXTRACTOR HOOD: HOUSING
B 1
EXTRACTOR HOOD: SUPPORT SURFACE OF THE HOUSING
B 2
EXTRACTOR HOOD: RETRACTABLE AND EXTENDABLE
6. Fix the metal supports (C) on the housing of the extractor hood using the
appropriate screws (D / 4 pcs. M4*12): see fig. below. Adjust the metal supports
according to the distance to the floor or to the distance to the bottom of the built-
in cabinet. The metal supports must stand firmly on the ground. Adjust the metal
supports accordingly. The firm contact of the metal supports with the floor or
the bottom of the built-in cabinet also ensures that the appliance does not vibrate.