Instructions

LIGHT IS ON BUT MOTOR DOES NOT WORK:

1. Ventilation damper blocked.

1. Remove blockage.

2. Motor mounting defective.

2. Replace motor.

ABNORMAL MOTOR-SMELLS:

1. Motor defective.

1. Replace motor.

SMEAR OF OIL:

1. One-way valve is leaky.

1. Seal the valve.

APPLIANCE VIBRATES:

1. Motor not properly fixed.

1. Fix motor properly.

2. Hood not properly fixed.

2. Fix hood properly.

INSUFFICIENT EXTRACTING CAPACITY:

1. Too much distance hood-hob.

1. Lower position of hood.

2. Too much draught because of open

doors and/or windows.

2. Close the doors/windows.

APPLIANCE IS UNSTABLE:

1. Screws are not firmly tightened.

1. Tighten the screws.

2. The mounting bracket / mounting

plate is not fixed firmly.

2. Fix the mounting bracket /

mounting plate properly.

IF THE HOOD DOES NOT WORK PROPERLY AND / OR YOU CAN HEAR

INCREASED OPERATING NOISE, CHECK THE SCHEDULE BELOW:

➢ Check condition and cleanliness of the filters.

➢ Check that the carbon filter has been replaced on time (at least every 3 - 6

months).

If the appliance has a malfunction not noted on the schedule or if you have

checked all items on the schedule but the problem still exists, please contact the

shop you purchased the appliance at.