Instructions

50
REPLACEMENT INTERVAL FOR CARBON FILTERS:
➢ At least every 3 - 6 months according to the frequency of use of the extractor
hood.
You can order the CARBON FILTERS at
www.pkm-online.de
➢ Type name of the CARBON FILTERS: See chapter TECHNICAL DATA
5.3 Replacing of the illuminant
WARNING! The LED-illuminant must be replaced by a competent
person only. If the LED-illuminant is damaged, please contact a qualified
professional. Illuminants and the replacing of illuminants are not included
in guarantee.
6. Trouble shooting
MALFUNCTION
POSSIBLE CAUSE
MEASURE
THE APPLIANCE DOES NOT WORK AT ALL:
1. The plug of the appliance is not
connected to the socket.
1. Connect the appliance to the mains
properly.
2. The plug has become loose.
2. Check the plug.
3. The socket is not supplied with
energy.
3. Check the corresponding socket by
connecting it with another appliance.
4. The fuse is switched off.
4. Check the fuse box.
5. The voltage is too low.
5. Compare the data on the model plate
with the data of your energy supplier.