Instructions

36
1. We recommend to carry out the installation of the extractor hood by
qualified personnel. Damages caused by improper installation of the
appliance are not subject to the guarantee or warranty!
2. The appliance must be transported and installed by at least two
persons.
3. Unpack the parts of the chimney very carefully; otherwise you will
damage the chimney
4. Remove the complete packaging materials before initial operation.
The appliance may be equipped with a transportation lock. Remove
the transportation lock completely. When removing be very careful.
Do not use any aggressive detergents to remove residues of the
transportation lock.
5. Clean and maintain the appliance regularly to enable its proper
operation and optimal performance.
6. Take the enclosed parts from the packaging and its polystyrene-
components.
7. Check that the power cord and the appliance are not damaged before
electrical connection.
8. The rating plate must not be removed or made illegible, otherwise
all terms of the warranty become invalid!
SAVE THESE INSTRUCTIONS.
 The manufacturer and distributor are not responsible for any damage or
injury in the event of failure to comply with these instructions.
2. Installation
We recommend to carry out the installation of the extractor hood by
qualified personnel. Damages caused by improper installation of the
appliance are not subject to the guarantee or warranty!
1. The load-bearing capacity of the ceiling of the installation room must be checked
before you install the appliance.
2. The appliance must be installed at a suitable position only.
3. Before you install the appliance, check that there are not any electrical or other
cables in the installation area; this prevents these cables from being drilled
unintentionally.
4. Clean the environment thoroughly before installation. This prevents dust or
rubble from being sucked in during initial operation of the appliance.