Instructions

3. Then clean the grease filter(s) with a soft brush. Be careful not to damage the grid
of the grease filter(s).
4. After cleaning: Rinse the grease filter(s) thoroughly using hot water.
5. Repeat this process in case of stubborn soilings or deposits.
6. Dry the filter(s) properly before you reinstall it / them.
CLEANING OF THE ALUMINIUM GREASE FILTERS IN THE DISHWASHER:
The grease filters can also be cleaned in the dishwasher: normal programme (up
to 55
0
C).
Do not put the filter(s) in the dishwasher together with tableware. Dry the filter(s)
properly before you reinstall it / them.
NOTICE! Filters which are blocked with food leftovers are not
covered by the guarantee.
6.2 Carbon filters
WARNING! Switch off the appliance and disconnect it from the mains
before you install any carbon filters (use the relevant fuse in your
household fuse box).
CARBON FILTERS for your extractor hood are optional available.
Conventional carbon filters cannot be cleaned.
The capacity of these filters is limited. You can use such filters for about 3 - 6
months approx.
Replace used filters immediately. Find further information on the filter packaging.
REPLACEMENT INTERVAL FOR CARBON FILTERS:
At least every 3 - 6 months according to the frequency of use of the extractor
hood.
You can order the CARBON FILTERS at
www.pkm-online.de
Type name of the CARBON FILTERS: See chapter TECHNICAL DATA