Instructions

55
NOTICE! Never use stainless steel cleaner for the direct environment of
the control panel or the control panel itself.
NOTICE! Aggressive detergents such as abrasive detergents, vinegar
cleaners, etc. damage the surface of the extractor hood.
6.1 Grease filters
WARNING! Failure to follow the cleaning instructions will increase the
RISK OF FIRE due to fat deposits.
NOTICE! The colour of the metal surface may change due to frequent
cleaning as well as the use of aggressive detergents. Such changes do
not influence the capacity of the appliance and are no reason for
complaint.
NOTICE! Do not damage the grid of metal-made (aluminium) grease
filters.
 Clean the filter(s) by hand or in a dishwasher regularly (up to 55
0
C).
 Do not use any acrid or corrosive detergents.
 Do not use any abrasive detergents!
 Do not use any alkaline dishwasher-detergents! (pH more than 7).
CLEANING INTERVAL FOR ALUMINIUM GREASE FILTERS:
 Every 2 - 3 weeks according to the frequency of use of the extractor hood.
MANUAL CLEANING OF THE ALUMINIUM GREASE FILTERS:
1. Remove the aluminium grease filter(s); s. fig. below.
2. Soak the aluminium grease filter(s) in warm rinse water (up to 55
0
C).