Instructions

42
3. Connect the decor plate with the mounting
plate using the appropriate screws: 2*ST4 (8
mm).
4. Press the tips of the rope holders (A / s. fig. below) slightly and insert the
holding ropes
17
(B). The single holding rope will be blocked automatically when
you release the tip of the respective rope holder.
Adjust the length of the holding ropes according to your individual
requirements (A and B / s. fig. below). Strictly observe the minimum distance
between extractor hood and hob.
A
PRESS SLIGHTLY
B
INSERT THE HOLDING ROPES / ADJUSTMENT: PULL THE
HOLDING ROPES DOWNWARDS
Ensure that the extractor hood is in horizontal position to avoid
accumulations of fat in one corner of the appliance.
You must press the tips of the rope holders to adjust the holding ropes.
17
The holding ropes may be pre-assembled on delivery (depending on model)