Owner's manual

Changing the lamp of the
Visualizer:
1. Remove the power cord of
the Visualizer.
2. Remove lamp housing glass.
(1 Screw)
3. Remove the safety clip
4. Change the lamp.
CAUTION: Hot when used!
Lamp type: Osram Dulux S/E
9W/21 or equivalent
121 mm
(4.8")
310 mm (12.2")
260 mm (10.2")
113 mm (4.5")
405 mm (15.9")
150mm (5.9")
580 mm (22.9")
150 mm
(5.9")
485 mm (19")
405 mm (15.9")
235mm (9.2")
8
Technical data:
VZ-7D VZ-5F
Pick-up element / Video:
Built-in camera system:
1-CCD unit – ¼“ interline transfer
Effective pixels:
PAL models: 752x582 / NTSC models: 768x494
Horizontal resolution:
> 470 TV lines
Iris:
automatic and manual automatic
Autofocus:
dynamic high speed, on/off switch
White balance:
automatic and manual automatic
Optics:
(F=4.1 - 73.8mm, f=1.4 ~ 3.0)
72x zoom
(18x optical + 4x digital)
18x optical zoom
Depth of focus:
(depth of field)
18mm (0.7”) on small picture, size: 42x33mm (1.7”x1.3”)
200mm (8”) on largest picture, size: 360x270mm (14.4”x10.8”)
Operation:
Camera control panel:
functions: zoom in, zoom out, autofocus on/off
Infrared remote control:
included (functions: zoom, iris,
manual focus, presets, image on/off)
not available
Power and light controls:
power on/off, light on/off or light on lightbox
Power-on preset:
autofocus on, autoiris on, light on, pick-up size: 210x140mm (8.3“x5.5”)
Special drawer for slides:
included not available
Lighting element:
Light source:
high frequency fluorescent lamp
Light system:
light either on working surface or in front of the unit, no blinding of audience
or speaker, very low stray light
Scanning area:
Objects on working surface:
(length x width)
min.: 5.5x4mm (0.24”x0.18”)
max.: 370x276mm (14.6”x10.9”)
min.: 22x16mm (0.9”x0.6”)
max.: 370x276mm (14.6”x10.9”)
Objects on working surface:
(height)
up to 370mm (14.6”) in wide position – 130mm (5.1”) in tele position
Objects in a room:
length, width and height to infinity
Connections:
Y/C (S-Video) output:
4-pin connector, Y-signal: 1Vpp 75W, C-signal: 0.3Vpp 75W
Composite video output:
RCA-connector, VBS-signal: 1Vpp 75W
Serial control input:
configuration: RS-232 not available
12V DC output:
For external lightbox or LCD-monitor
General specifications:
Power consumption:
max. 25VA
Power source:
12V DC
Made in:
Austria (European Community)
Weight:
Visualizer: 4.6kg (10lbs), power pack: 0.7kg (1.1lbs)
Accessories (Scope of supply):
Mains power pack:
90-240V AC / 12V DC, 1.5A
Carrying case (Soft case):
with pocket for projector standard edition
Other supplied accessories:
Y/C (S-video) cable, instructions, (VZ-7D: ir-remote control)
Specification and availability subject to change!