User manual

Installation Cooling
Version 1.5 62
13.2 Cooling
WARNING
Damaging the unit!
 Mount heat sink.
For proper function some components of the SCB-12 require a
heat sink.
In the drawing the relevant components are solid and hatched.
The use of a soft silicon gap-pad is necessary to compensate the
different height of the components.
13.2.1 Heat Sink
Thermal resistance (Rth) 3.62 °C/W
13.2.2 Gap Pad
Technical data of the recommended gap pad:
i.e. GAP Pad Ultra Soft from Bergquistcompany
www. bergquistcompany.com
(GPVOUS-0.08-00-00-NA)
Property
Value
Test method
Hardness
5Shore
ASTMD2240
Dielectric breakdown
>6000 VAC
ASTM D149
Dielectric constant (1000Hz)
5,5
ASTM D150
Volume resistively (Ohm-
meter)
10
11
ASTM D257
Thermal conductivity
1.0 W/m-K
ASTM D5470