Manualshelf

User manual

ManualsBrandsWolfVision ManualsCamcordersSCB-12
51525354555657585960
Maintenance
Version 1.5 56
10 MAINTENANCE
10.1 Firmware Upgrades
The software (firmware) of the SCB-12 (including the on-screen
HELP) can easily be upgraded to the latest version. The firmware
update can be done via USB, Ethernet (LAN) or RS232.
Firmware update files can be downloaded for free at
www.wolfvision.com/support
Updates via USB and Ethernet/LAN can be made with the
WolfVision Connectivity Software (version 1.5 and higher) and
updates via RS232 can be made with WolfVision's Firmware Up-
date Utility. Both programs can also be found under the same link.
For a RS232 connection, use a crossed serial RS232 cable (Null
modem cable).
10.2 IR (Infrared) Remote Control
Please note that an infrared remote control can only be used up to
a certain distance from the unit. Objects situated between the SCB-
12 and the infrared remote control, and weak batteries, interfere
with reception.
If the SCB-12 can only be controlled from a close distance, or if it
cannot be controlled at all with the infrared remote control, you may
have to change the batteries.
Open the cover on the back of the remote control and replace the
two 1.5 V AA batteries with new ones.
Check the polarity of the batteries!
Recycle batteries in accordance with local regulations!
10.3 Different IR-Codes
If you want to work with more than one SCB-12 in the same room,
the units should be set to different infrared codes, in order to con-
trol them all individually.
To change the IR code, enter the on-screen menu, go to "Misc.
Settings" and set the "IR Code" to A, B, C or D (code A is default).
To change the IR code on the remote control, simultaneously press
PRESET 1, PRESET 2 (#13) and ZOOM TELE (#12). Each time
this key combination is used, the code switches from A to B, C, D
... A ...in order given.
For resetting the remote control to code A, simultaneously press
PRESET 1, PRESET 2 and ZOOM WIDE.
The LASER indication LED (#20) shows the selected code (it
flashes one time for code A, two times for code B, three times for
code C and four times for code D).
symbolic view