User manual

Resolution and refresh rate
54 Version 1.5
9 Resolution and refresh rate
WARNING
Damaging the display device
Not specified resolutions and refresh rates can dam-
age the display device!
 Note the information in the manual of the con-
nected display devices.
The SCB-12 has a native resolution of SXGA- (1280x960 pixels),
720p (1280x720 pixels) and WXGA* (1280 x 800). Other resolu-
tions will be converted.
The DVI output (#10) and RGB output (#8) can be set to the follow-
ing resolutions and refresh rates:
Resolution
(Pixel)
Picture
format
refresh rate
vertical frequency
1080p HD/HDTV
1920x1080
16:9
50Hz
60Hz
720p HD/HDTV
(1280 x 720)
16:9
50 Hz
60 Hz
WSXGA
1680x1050
16:10 60Hz
WXGA+
(1440 x 900)
16:10 60 Hz
WXGA
(1360 x 768)
16:9 60 Hz
WXGA*
(1280 x 800)
16:10 60 Hz
SXGA+
(1400 x 1050)
4:3 60 Hz
SXGA
(1280 x 1024)
5:4
60 Hz
75 Hz
SXGA-
(1280 x 960)
4:3
60 Hz
85 Hz
XGA
(1024 x 768)
4:3
60 Hz
75 Hz
SVGA
(800 x 600)
4:3 60 Hz
VGA
640x480
4:3 60Hz
The "Auto resolution" function is activated by default. In this mode
the SCB-12 continuously checks which devices are connected to
the RGB (#8) and DVI output (#10) and automatically sets the op-
timal output mode for each connected device separately. Please
note that the SCB-12 cannot check the possible resolution, if the
connected units or the cables* are not "Plug and Play" compatible.
If the SCB-12 cannot detect the resolution of the connected device,
the output is set to the default of SXGA- (1280x960)/60Hz.
*Cables with plug and play compatibility must have a 15-pin plug
on both ends with all pins connected, pin 9 is not used.
If you cannot use the "Auto resolution" function, you can select the
output mode manually in the on-screen menu of the SCB12 (see
page 29ff).