User manual

OSD
Version 1.5 52
8.2.2 Extra Menu
Enter the extra menu by keeping pressed the MENU key for 4 se-
conds.
SCB-12
SCB-12 V1.30c Extra Menu
Baud Rate
115200
Number of IR codes
4
Mounting Position
REGULAR
Pixel Calibration
Noise Suppression
ON
Reset Admin Password
Exit
Speed of RS-232 port.
Factory setting is 115200
Possible settings:
• 9600: data transfer with 9600 baud/s
• 19200: data transfer with 19200 baud/s
• 38400: data transfer with 38400 baud/s
• 57600: data transfer with 57600 baud/s
• 115200: data transfer with 115200 baud/s
Number of possible IR codes
Factory setting is 4
Function for authorized personnel only!
Do not change this setting. Otherwise the supplied IR remote con-
trol may not support the IR code of the unit!
To rotate the image by 180°.
Factory setting is REGULAR
Possible settings:
• REGULAR: image will be output in normal orientation
• FLIPPED: image will be rotated by 180°
The setting "FLIPPED" is useful when the camera is mounted up-
side down.
To restore defective pixels automatically.
To proceed the restoration, cover the camera lens.
Function for authorized personnel only!
Baud Rate
Number of IR Codes
Mounting Position
Pixel Calibration