User manual

OSD
Version 1.5 38
Power Settings
SCB-12
POWER SETTINGS
Power-On Preset
ON
Store Power-On Preset
Display Logo
ON
Mains-On
POWER-ON
Auto-Power-Off
OFF
Return
Factory setting is ON
Possible settings:
• ON: Power-On preset will be recalled when switching the unit on
• OFF: unit will stay in last zoom position
Perform all desired adjustments like zoom, image turn, etc. and
select this line to store the Power-On preset. To get factory Power-
On Preset, recall default preset settings in the Preset Control
menu.
Factory setting is ON
Possible settings:
• ON: WolfVision-Logo "WolfVision SCB-12" will be displayed
shortly when switching on the SCB-12
• OFF: the unit will start without showing the logo.
Defines the behavior of the unit when connecting the power
supply
Factory setting is POWER-ON
Possible settings:
• POWER-ON: the unit will be switched on when connecting the
power supply
• STAND-BY: the unit will stay in stand-by.
Energy saving function, when the unit is not in use for the specified
time it will switch automatically to stand-by mode.
Factory setting is OFF
Possible settings:
• OFF: the unit stays on
• 30min: stand-by mode after 30min of non-use
• 1h: stand-by mode after 1h of non-use
• 2h: stand-by mode after 2h of non-use
• 3h: stand-by mode after 3h of non-use
• 4h: stand-by mode after 4h of non-use.
Returns to previous menu page.
Power-On Preset
Store Power-On Preset
Display Logo
Mains-On
Auto-Power-Off
Return