User manual

OSD
Version 1.5 32
Sets brightness of picture when Auto Iris is used
(-10 darkest and +10 brightest image). Optimum setting also de-
pends on connected display device.
Factory setting is 0
Possible settings are:
• -10 to +10 in integer steps
Changes the behavior of the Auto Iris control to change the bright-
ness reference to darker areas of the image.
Optimum setting depends on the recorded image and back light.
Factory setting is OFF
Possible settings are:
• OFF: no back light compensation
• MED: compensation of back light up to 50% of the image area
• HIGH: compensation of back light up to 80% of the image area
Trigger function of the SCB-12 (see page 28)
Factory setting is OFF
Possible settings are:
• ON: Trigger function is activated
• OFF: Trigger function is de-activated
Available with activated Trigger function only.
Factory setting is POS
Possible settings are:
• POS: triggering to the positive edge of trigger pulse
• NEG: triggering to the negative edge of trigger pulse
Returns to previous menu page.
Image Brightness
Back Light Compensation
Extern Trigger
Extern Trigger Edge
Return