User manual

Work with the SCB-12
23 Version 1.5
6 Working with the SCB-12
• Connect all necessary cables to the SCB-12
• Set the output resolution and refresh rate to the right setting
(depends on the connected display device) (see page 29ff)
IMPORTANT
Note the hints in the manual of the connected display device
regarding resolution and refresh rate.
• Switch on the SCB-12 by pressing the power key or sending a
power-on command.
• By default, the SCB-12 performs the power-on preset
automatic setting to a middle zoom position, autofocus and auto iris
are activated.
Power-on Preset