User manual

Test set IR Remote Control
17 Version 1.5
#20 LASER indication LED / IR-Code indication LED
For indicating the LASER status of the unit (red=on, dark=off).
When changing the IR-code on the IR-remote control, the
LED flashes in accordance with the selected IR-code (see
page 56).
#21 LASER POINTER key
Important: Do not stare directly into the beam.
This is hazardous for your eyes!
#22 IMAGE TURN key
For picking up vertical (portrait) pages with higher resolution
(see page 22).
#23 Manual FOCUS keys
For focusing the picture.
When the Manual FOCUS keys are pressed the SCB-12
switches off the autofocus function. Using the AF key switch-
es the autofocus function on again.
#24 Manual IRIS keys (brightness adjustment)
When the IRIS keys are pressed, the SCB-12 switches off the
auto iris function. The next time the ZOOM keys are used the
auto iris is switched on again.
For specialists:
The auto iris priority can be switched off in the on-screen
menu. ("Auto iris priority" means when pressing the ZOOM
keys, the auto iris switches on.)
The overall brightness level can be set lower or higher in the
on-screen menu with "Image Brightness" (see page 29ff). The
optimal setting depends on the connected display device.
#25 HELP/RESET key for on-screen menu
While you are in the on-screen menu you can activate the on-
screen help by pressing the HELP key. Pressing this key for 2
seconds resets the selected menu item (see page 29ff).
#26 MEMORY keys 1 - 9
For saving and recalling pictures (see page 21).
#27 POWER key
Switches the unit on and off. When switching the unit on, the
SCB-12 automatically runs the power-on preset.