Owner manual

13
Ceiling Tile
17) Tighten Screws on Mounting Tabs.
18) Attach alignment ring to face-plate with
Nuts (G) provided.
This ring centers and stabilizes the
assembly once the face-plate is installed.
19) (Optional)
Place the four Trim Mounting Screws (B)
though the trim ring. Peel back the
adhesive backing from the Light Mask (H).
Use the four screws (B) to align the mask
properly and adhere to rear of trim ring.
Note: The Light mask (H) is optional. It may be
used to block light and/or airflow from the
camera opening.
20) Install face-plate using Trim Mounting
Screws (B).
6
Sheetrock