Owner manual

9
Ceiling Tile
4) Slide circular plate into mounting
assembly.
5) Secure circular plate into mounting
assembly using Mounting Tabs (C) and
Mounting Screws (D).
Note: Use the center hole of the Mounting Tab
(C
). (Countersunk screw hole is not needed
in this step). Only 2 Tabs are required. You
must use the screw holes closest to rail
clamps (see photo).
6) Attach the four Mounting Tabs (C) with
Mounting Screws (E). Do not tighten
screws.
2
Sheetrock
Rail clamp