Use and care guide

6 | Wolf Customer Care 800.222.7820
Control Panel
The electronic control panel features touch controls and a
visual display. Refer to the illustration below. The control
panel is hidden when the warming drawer is closed. Open
the drawer to access the control panel.
Temperature
The warming drawer features four preset temperature set-
tings; PROOF, LOW, MED and HIGH. During preheat, the
temperature display will alternate between the set point and
the actual temperature. ‘Lo’ will appear until the temperature
reaches 85°F
(30°C). An audible chime indicates preheat is
complete. Refer to the chart below.
IMPORTANT NOTE: When warming towels, temperature can
not exceed 120°F
(50°C).
Setting temperature:
1 Touch POWER ON/OFF.
2 Touch one of the PRESETS to select the preset tempera-
ture or touch TEMP UP or DOWN arrows to select the
desired temperature.
TEMPERATURE
SETTING PRESET RANGE
PROOF 85°F (30°C) 80–110°F (25–40°C)
LOW 120°F (50°C) 80–200°F (25–95°C)
MED 160°F (70°C) 80–200°F (25–95°C)
HIGH 200°F (95°C) 80–200°F (25–95°C)
Timer
The warming drawer has a built-in timer that will auto-
matically turn off after four hours of use. The timer can be
adjusted from one minute to 24 hours.
Setting timer:
1 Select desired temperature.
2 Touch TIMER UP or DOWN arrows to select the desired
time. ‘TIMER’ and the shut off time will appear in the
display.
Custom Preset Temperature and Shut Off
Customize a preset temperature setting using desired tem-
perature and timing duration (one minute to 24 hours) with
automatic shut off.
Setting custom preset temperature and automatic shut off:
1 Touch POWER ON/OFF.
2 Touch and hold the desired preset for 5 seconds until
TIMER and ‘4:00’ appear in the display.
3 Touch TEMP UP or DOWN arrows to select the desired
temperature.
4 Touch TEMP UP or DOWN arrows to select the desired
automatic shut off timing duration.
5 Touch and hold the desired preset again for 5 seconds
to save the settings.
Control panel.
WARMING DRAWER OPERATION