Installation guide

Warming Drawer Installation 9
wolfappliance.com
WWD30 with 1-Inch Thick Drawer Front
UNDERCOUNTER STANDARD INSTALLATION
2"(51) x 2" (51)
ANTI-TIP BLOCK
DIMENSION
WILL VARY*
23
1
/2" (597)
BOTTOM
OF OPENING
TO FLOOR
(typical)
*Dimension must accommodate height of anti-tip block and drawer face overlap. Dashed line represents profile of unit.
IMPORTANT NOTE: Unless you are using cabinets deeper than 24" (610), it is recommended that the electrical supply for the warming drawer
be placed in an adjacent cabinet within reach of the conduit.
FRONT VIEWSIDE VIEW
24" min (610)
CABINET DEPTH
36" rec (914)
33" min (838)
CABINET WIDTH
30
3
/8" (772)
FLUSH INSET WIDTH
28
5
/8" (727)
OPENING WIDTH
7
/8"(22) PLATFORM
7
/8"(22) TOP AND SIDE CLEATS
TOP VIEW
SIDE CLEATS
24"min (610)
FLUSH INSET
DEPTH
1" (32)
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
10
7
/8" (276)
FLUSH INSET
HEIGHT
9
1
/8" (232)
OPENING HEIGHT
E
E
2"(51) x 2" (51)
ANTI-TIP BLOCK
DIMENSION
WILL VARY*
23
1
/2" (597)
BOTTOM
O
F OPENING
TO FLOOR
(typical)
*Dimension must accommodate height of anti-tip block and drawer face overlap. Dashed line represents profile of unit.
IMPORTANT NOTE: Unless you are using cabinets deeper than 24" (610), it is recommended that the electrical supply for the warming drawer
be placed in an adjacent cabinet within reach of the conduit.
FRONT VIEWSIDE VIEW
E
24" min (610)
CABINET DEPTH
33" rec (838)
3
0"
min (610)
CABINET WIDTH
2
8
5
/8" (727)
OPENING WIDTH
7
/8"(22) PLATFORM
36" (914)
STANDARD
F
LOOR TO
COUNTERTOP
HEIGHT
9
1
/8" (232)
OPENING HEIGHT
1
0
3
/8"
(264)
UNDERCOUNTER FLUSH INSET INSTALLATION