VHood IG

wolfappliance.com | 9

Wiring Connections

IN-LINE/REMOTE BLOWER WIRING

1 Remove the top cover of the electrical box by extract-

ing the two screws. Refer to the illustration.

2 Remove one of the round knockouts using a ﬂat blade

screwdriver.

3 The terminal block is wired for an internal blower.

For in-line and remote blowers, the existing blue and

brown wires must be removed and placed in the two

left positions to accommodate the in-line or remote

blower wire. Refer to the illustration.

4 Insert Romex

wire from the in-line or remote blower

through the knockout and secure using an approved

cord stain relief.

5 Connect white to blue, black to brown and green to the

ground screw. Refer to the illustration.

6 Verify all wires are secure and not pinched between the

cover, and install the cover.

MOVE

WIRES HERE

WHITE

BLACK

GREEN

GROUND

BLUE

BROWN

TO IN-LINE/REMOTE

BLOWER

BLUE

BROWN

Wiring location

In-line/remote blower wiring

Installation