Installation Manual

wolfappliance.com | 9
INSTALLATION
Wiring Connections
IN-LINE | REMOTE BLOWER WIRING
1 Remove the top cover of the electrical box by extracting
two screws. Refer to the illustration.
2 Remove one of the round knockouts using a at blade
screwdriver.
3 Insert Romex
®
wire from the blower through the
knockout and secure using an approved cord stain relief.
4 Connect white to blue, black to brown and green to
ground. Refer to the illustration.
5 Place all wiring connections inside the electrical box and
reinstall the cover. Make sure all wires are secure and not
pinched between the cover and electrical box.
6 Secure the junction box supplied with the hood to the
support frame, then connect to the (Romex
®
) power
supply from the home. Once the connection has been
made, insert the plug into the receptacle on the hood.
KNOCKOUT
COVER
WHITE
BLACK
GREEN
GROUND
BLUE
BROWN
TO IN-LINE/REMOTE
BLOWER
BLUE
BROWN
Wiring location. In-line | remote blower wiring.