Installation Guide

8 | Wolf Customer Care 800.222.7820

Installation

INTERNAL BLOWER

IMPORTANT NOTE: The blower must be installed and

plugged in prior to making the electrical connection to the

hood.

For models with a bottom panel, the panel must be removed

prior to installing the blower. Refer to the illustration below.

1 Remove the lters.

2 For model VW30S, remove the screw cover and screw to

remove the spacer. Refer to the illustration below.

3 Insert the three-prong plug from the blower wire into the

hood receptacle. Refer to the illustration.

4 Insert the blower by aligning the round discharge on the

blower with the discharge on the hood.

5 Insert the plug from the blower wire into the receptacle

on the blower. Refer to the illustration.

6 Secure the blower to the hood using the two mounting

screws provided.

7 For model VW30S, install the spacer, screw, and cover.

INSTALLATION

RECEPTACLE

MOUNTING

SCREW

Hood receptacle

Mount blower

TA B

SPACER

Bottom panel removal

Spacer removal (model VW30S)