NEW SPEED OVEN DESIGN GUIDE REVISED 11 / 2018
TA B L E O F C O N T E N T S 3 SPEED OVEN 4 OVERALL DIMENSIONS 5 P L A N N I N G I N F O R M AT I O N 6 I N S TA L L AT I O N 9 WOLF WARRANTY Features and specifications are subject to change at any time without notice. Visit wolfappliance.com/specs for the most up-to-date information. Throughout this guide, dimensions may vary by ± 1/8" (3). Dimensions in parentheses are millimeters unless otherwise specified.
S PEED O VEN Speed Oven The Wolf speed oven has features that make fast meals better meals. Available in 24" and 30" widths, they are designed to match Wolf transitional, professional, and contemporary products. The speed oven can be installed in a standard or flush inset application. S PEED O V EN S TRAN SITION A L SPO24TE/S/TH SPO30TM/S/TH SPO30TE/S/TH P ROFESSION A L SPO30PM/S/PH SPO30PE/S/PH C ON TEMP ORARY SPO30CM/B/TH wolfappliance.
S PEED O VEN Overall Dimensions T R ANS IT IO NAL 7/8" (22) 21 3/16" (538) 17 1/2" 17 7/8" (446) (454) W WIDTH 2 1/2" (64) 21 1/2" (546) BEHIND FRAME OPEN OVEN DOOR WIDTH 14 3/16" (360) W 24" Transitional 23 1/2" (597) 30" Transitional 29 7/8" (759) P RO F ES S IO NAL 7/8" (22) (446) (454) (759) 3 1/4" (83) (538) 17 1/2" 17 7/8" 29 7/8" 21 3/16" 21 1/2" (546) BEHIND FRAME OPEN OVEN DOOR 14 3/16" (360) C ONT EMPO R ARY 7/8" (22) (446) (454) (759) 2 1/2" (64) (538) 17 1/2"
S PEED O VEN Planning Information The speed oven can be installed in a standard or flush inset application. Finish the edges of the opening. They may be visible when the door is open. For standard installations, the face trim will overlap stiles and rails. Refer to the chart below. For flush inset installations, a minimum 1/8" (3) reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.
S PEED O VEN Speed Oven S TANDAR D INS TAL L ATION 23" (584) OPENING DEPTH TOP VIEW E 17 11/16" (449) OPENING HEIGHT W OPENING WIDTH SIDE VIEW FRONT VIEW NOTE: 24" (610) and 30" (762) models require the same opening dimensions. OPENING WIDTH W 24" Model 22 1/8" (562) 30" Model 22 1/8" (562) 6 | Wolf Customer Care 800.222.
S PEED O VEN Speed Oven F LUS H INS ET INSTAL L ATION 7/8" (22) 24" (610) FLUSH INSET DEPTH FINISHED CLEATS* TOP VIEW E 5/16" (8) 18 1/8" (460) FLUSH INSET HEIGHT** A 1/8" (3) W FLUSH INSET WIDTH** SIDE VIEW FRONT VIEW *Will be visible and should be finished to match cabinetry. **Dimension provides minimum reveals. FLUSH INSET WIDTH W 24" Model 233/4" (603) 30" Model 301/8" (765) A 13/16" (21) 4" (102) wolfappliance.
Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowflake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf & Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries. All other trademarks are property of their respective owners in the United States and other countries. 8 | Wolf Customer Care 800.222.
Wolf Appliance Residential Limited Warranty FOR RESIDENTIAL USE FULL TWO YEAR WARRANTY* For two years from the date of original installation, this Wolf Appliance product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Wolf Appliance under the above warranty must be performed by Wolf factory certified service, unless otherwise specified by Wolf Appliance, Inc.
W O L FA P P L I A N C E .
