Installation Guide

8 | Wolf Customer Care 800.222.7820

Installation

1 Turn o power to the electrical outlet.

2 Move the unit near the opening. Remove and recycle

packing materials.

3 The 30" (762) model is shipped with two shipping brack-

ets located on each side, behind the front face. Remove

both brackets, then reinstall the screws. Refer to the

illustration below.

4 Plug the power cord into the grounded outlet.

5 Position the oven in the opening and slide back until

the mounting ﬂange is ﬂush with the face of the cabi-

net. Avoid pinching the power cord between the unit

and cabinet wall.

6 Open the door. Using the two holes on either side of

the mounting ﬂange as a template, drill pilot holes into

the cabinet using a ⁄" drill bit.

7 Mount the oven using the four screws provided. Refer

to the illustration below.

8 Turn power back on to the electrical outlet.

REMOVE

BRACKETS

THEN REINSTALL

SCREWS

MOUNTING

SCREWS

Shipping brackets

Mounting screws

Installation