Installation Guide

4 | Wolf Customer Care 800.222.7820
Specifications
Installation Requirements
The oven can be installed in a standard or flush inset appli-
cation. If a cooktop is installed above the oven, a minimum
of ⁄"
(6) is required between the units.
Finish the edges of the opening. They may be visible when
the door is open.
For standard installations, the face trim overlaps stiles and
rails. Refer to the chart.
For flush inset installations, a minimum ⁄"
(3) reveal is
required on all sides. To ensure consistent reveals, each
corner of the opening must be exactly 90°.
INSTALLATION REQUIREMENTS
BASE SUPPORT MIN
24" E Series Oven 150 lb (68 kg)
TRIM OVERLAP
Top ⁄" (6)
Bottom 0" (0)
Sides ⁄" (17)