INSTALLATION GUIDE Gas Ranges
Contents Important Note Wolf Gas Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 To ensure the safe and efficient use of Wolf equipment, please take note of the following types of highlighted information throughout this guide: Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Gas Range Specifications . . . . . . . . . . . . . . . . . . . . . . 5 Gas Range Installation . . . . . . . . . . . . . . . . . . . . . . . .
Wolf Gas Ranges 3 wolfappliance.com/specs Gas Range Installation IMPORTANT INSTRUCTIONS IMPORTANT NOTE: This installation must be completed by a qualified installer, service agency or gas supplier. Read this entire installation guide prior to installation and save for the local inspector’s reference. The homeowner should keep this installation guide for future reference. This appliance must be installed in accordance with National Electrical Codes, as well as all state, municipal and local codes.
Safety Instructions 4 IMPORTANT INSTRUCTIONS WHAT TO DO IF YOU SMELL GAS: If the information in this guide is not followed exactly, a fire or explosion may result, causing property damage, personal injury or death. • Do not try to light any appliance. • Do not touch any electrical switch. • Do not use any phone in your building. • Immediately call your gas supplier from a neighbor’s • Installation and service must be performed by a qualified installer, service agency or the gas supplier.
Gas Range Specifications 5 wolfappliance.
Gas Range Specifications 6 Installation Requirements VENTILATION Failure to locate the range without the proper clearances will result in a fire hazard. IMPORTANT NOTE: Caution must be used in planning the proper installation of the Wolf gas range to avoid fires or damage to adjacent cabinetry or kitchen equipment. Follow all minimum clearances to combustible surfaces shown in the installation illustration for your specific model on the following pages.
Gas Range Specifications 7 wolfappliance.com/specs Electrical Requirements ELECTRICAL SHOCK HAZARD: Plug into a grounded 3-prong outlet. Do not remove ground prong. Do not use an adapter. Failure to follow these instructions can result in electric shock, fire or death. The Wolf gas range requires a 110/120 V AC, 50/60 Hz electrical supply to operate the electronic ignition system. The service should have its own 15 amp circuit breaker.
Gas Range Specifications 8 Gas Supply Requirements EXPLOSION HAZARD: Use a certified gas supply line and install a gas shut-off valve. Securely tighten all gas connections. Failure to follow these instructions can result in explosion, fire or death. IMPORTANT NOTE: The gas range must be connected to a regulated gas supply. IMPORTANT NOTE: This installation must conform with local codes and ordinances.
Gas Range Specifications 9 wolfappliance.com/specs Gas Supply Requirements GAS MANIFOLD PRESSURE • Natural Gas: Standard orifices are set for 5" (12.5 mb) WC (water column). A natural gas pressure regulator is installed. • LP Gas: Standard orifices are set for 10" (25 mb) WC. An LP gas pressure regulator is installed. • Gas Supply Pressure: The maximum gas supply pressure to the regulator should never exceed 14" (34.9 mb) WC; .5 psi (3.5 kPa) for natural and LP gas. The minimum line pressure is 7" (17.
Gas Range Specifications 10 30" (762) Gas Range INSTALLATION SIDE CABINET 13" (330) 30" (762) TO 36" (914) max TO BOTTOM OF VENTILATION HOOD** 18" (457) min 6" (152) TO COMBUSTIBLE* 6" (152) TO COMBUSTIBLE* 30 1/4" (768) OPENING WIDTH 10" (254) 36" (914) FLOOR TO COUNTERTOP 37" (940) TO COOKING SURFACE 12" (305) 5 3/4" (146) 7 3/4" (197) FRONT VIEW E 2" (51) G 12" (305) LOCATION OF GAS AND ELECTRICAL EXTENDS ON FLOOR 5" (127) SIDE VIEW *Minimum clearance from rough opening to combustibl
Gas Range Specifications 11 wolfappliance.
Gas Range Specifications 12 48" (1219) Gas Range INSTALLATION SIDE CABINET 13" (330) 30" (762) TO 36" (914) max TO BOTTOM OF VENTILATION HOOD** 18" (457) min 6" (152) TO COMBUSTIBLE* 6" (152) TO COMBUSTIBLE* 48 1/4" (1226) OPENING WIDTH 26" (660) 37" (940) TO COOKING SURFACE 12" (305) 5 3/4" (146) 7 3/4" (197) FRONT VIEW 36" (914) FLOOR TO COUNTERTOP E LOCATION OF GAS AND ELECTRICAL EXTENDS ON FLOOR 2" (51) G 12" 5" (305) (127) *Minimum clearance from rough opening to combustible mater
Gas Range Specifications 13 wolfappliance.
Gas Range Installation Position the Range IMPORTANT NOTE: Before moving the range, protect any finished flooring to avoid damage to the floor. Secure oven door(s) closed. Using an appliance dolly, move the gas range into position near the installation opening. Remove and discard packing materials. If the oven door(s) need to be removed to position the range, refer to oven door removal on the following page. 14 Anti-Tip Bracket Installation This range can tip. Injury to persons could result.
Gas Range Installation 15 wolfappliance.com/specs Anti-Tip Bracket Installation Oven Door Removal WOOD FLOOR APPLICATIONS IMPORTANT NOTE: Remove the oven door(s) only if it is necessary to fit the range through a tight doorway. Removal may cause damage to the porcelain oven interior or the door(s). Door removal should be done by a qualified service technician or installer. After properly positioning the anti-tip bracket, drill 3/16" (5) pilot holes through the floor.
Gas Range Installation 16 Oven Door Removal OVEN DOOR REMOVAL OVEN DOOR REINSTALLATION 1) Remove the lower kickplate assembly. 1) Hold the oven door on both sides and position it with door hinges aligned with openings in the oven frame. 2) Open the oven door all the way and insert the door hinge pin through the hole in the appropriate hinge arm. Refer to the illustration below. 3) Remove both upper and lower hinge retainer mounting screws.
Gas Range Installation 17 wolfappliance.com/specs Gas Supply Connection Level the Range Before connecting the gas supply, make sure all valves are in a closed position. IMPORTANT NOTE: All connections to the gas piping must be wrench-tightened. Do not make connections too tight, this may crack the regulator and cause a gas leak. Do not allow the pipes to turn when tightening fittings. Assemble the flexible metal connector from the gas supply pipe to the gas pressure regulator.
Gas Range Installation Verify Range Operation IMPORTANT NOTE: Prior to operating the range, be sure to read the entire Wolf gas ranges use & care guide included with the range for important safety, service and warranty information. SURFACE BURNERS Place the burner parts on each burner base and position the burner grates before lighting. Surface burners of the gas range use electronic igniters.
Service Information 19 wolfappliance.com/specs Troubleshooting Service Information IMPORTANT NOTE: If the gas range does not operate properly, follow these troubleshooting steps: If service is necessary, maintain the quality built into your gas range by contacting Wolf factory certified service. • Verify that electrical power is being supplied to the range. For the name and number of Wolf factory certified service nearest you, check the contact & support section of our website, wolfappliance.
WOLF APPLIANCE, INC. P. O. BOX 44848 MADISON, WI 53744 821111 REV-A 1/ 2012 WOLFAPPLIANCE.COM 800.222.
