Installation Guide

10 | Wolf Customer Care 800.222.7820
3 Position the mounting brackets on the mounting strip
as shown in the illustration below. Secure the brackets
to the mounting strip with the provided screws and
washers.
MOUNTING BRACKET LOCATION
A
30" (762) Hood 23
1
/2" (597)
36" (914) Hood 24
1
/2" (622)
42" (1067) Hood 30
1
/2" (775)
48" (1219) Hood 36
1
/2" (927)
54" (1372) Hood 42
1
/2" (1080)
60" (1524) Hood 48
1
/2" (1232)
66" (1675) Hood 54
1
/2" (1384)
INSTALLATION
24"/27" Deep Wall Hood
INSTALLATION
WARNING
Wall framing must be able to support the weight of the
hood and internal blower, if applicable.
1 Refer to the illustration for typical wall framing. Additional
framing or blocking is required in the mounting bracket
location.
2 A wood mounting strip and hardware are provided with
the hood. Secure the mounting strip to the wall framing
and blocking with the provided screws and washers.
C
L
BLOCKING
MOUNTING
STRIP
1
/2" (13)
A
MOUNTING BRACKET CENTERS
15
1
/8" (384)
TO BOTTOM
OF HOOD
Mounting bracket location