Pro Wall Chimney Hoods IG

wolfappliance.com | 9
INSTALLATION
Complete the Installation
FILTERS
Install the grease cups at the bottom rear edge of the hood.
Orient the lters with the lines running vertically. To install,
place the top edge of the lter against the spring, press
upward and rotate the bottom. Refer to the illustration
below.
LIGHT BULBS
A suction-cup-style light bulb changer is provided with
the hood. To install, use the changer to push the bulb into
the receptacle and rotate counterclockwise one-quarter
turn. Refer to the illustration below.
WOLF LOGO
To attach the Wolf logo, clean the mounting area with
rubbing alcohol. Remove the paper backing, position the
logo parallel with the bottom of the hood, and press into
place.
SIDE VIEW
SPRING
FILTER
GREASE
CUP
LIGHT BULB
CHANGER
Filters Light bulb installation