Specifications

wolfappliance.com | 45
WOLF INDUCTION AND ELECTRIC COOKTOPS
Planning Information
A minimum height clearance of 6
1
/4" (159) is required from
the top of the countertop to any combustible surface
directly below the cooktop.
Contemporary induction and electric cooktops can be
mounted ush with the top of the countertop, or as a frame-
less installation sitting on top of the countertop surface. If
the cooktop is to be mounted ush with the countertop, a
recessed area surrounding the cooktop cut-out must be
provided. Wolf downdraft systems cannot be used with
contemporary induction and electric cooktops.
IMPORTANT NOTE: Flush mount installations are intended
for granite, solid surface or stone countertop surfaces only.
RANGES / RANGETOPSOVENS / WARMING DRAWERS OUTDOOR GRILLS VENTILATIONCOOKTOPS / COFFEE SYSTEMS
ELECTRICAL
Installation must comply with all applicable electrical codes.
Locate the electrical supply as shown in the illustrations on
the following pages. A separate circuit, servicing only this
appliance is required.
Performance may be compromised if the electrical supply is
less than 240 volts.
ELECTRICAL REQUIREMENTS
INDUCTION / ELECTRIC
Electrical Supply 3-wire, 240/208 VAC, 60 Hz
Conduit exible 4' (1.2 m)
SERVICE
15" Cooktop 20 amp dedicated circuit
30" Cooktop 40 amp dedicated circuit
36" Cooktop 50 amp dedicated circuit