Specifications

7
W OLF B UILT-IN O VENS
PLANNING AND
DESIGN INFORMATION
While you have many design options
to consider from a selection point of
view, there are only three different
sizes to consider when planning for
your layout. You can choose either a
30" (762 mm) or 36" (914 mm)
single oven or a 30" (762 mm)
double oven.
Oven Interior Dimensions
The 30" (762 mm) single oven
interior dimensions, as well as each of
the double ovens are 25" (635 mm)
wide by 16-1/4" (413 mm) high and
19" (483 mm) deep. The interior of
the 36" (914 mm) single oven is 30"
(762 mm) wide by 13-1/4" (337 mm)
high and 19" (483 mm) deep.
27
1
/2"
(699 mm)
24"
(610 mm)
29
7
/8"
(759 mm)
50"
(1269 mm)
24"
(610 mm)
29
7
/8"
(759 mm)
24
3
/8"
(619 mm)
24"
(610 mm)
35
5
/8"
(905 mm)
36" (914 mm) Single Oven Unframed
Model SO36U shown
30" (762 mm) Double Oven Framed
Model DO30F shown
30" (762 mm) Single Oven Framed
Model SO30F shown
Space Requirements
The illustrations of the three different
oven sizes give you overall dimen-
sions which include the oven face
trim. The finished cut-out dimensions
you need to incorporate into your
plans are shown in the illustrations on
the following pages.
This appliance must be installed in
accordance with National Electrical
Codes, as well as all state, municipal
and local codes. The correct voltage,
frequency and amperage must be
supplied to the appliance from a
dedicated, grounded circuit that is
protected by a properly sized circuit
breaker or time delay fuse. The
proper voltage, frequency and
amperage ratings are listed on the
model/ serial rating plate.
Refer to the following pages for
installation specifics for the three
different oven sizes.