Specifications

52
24" (610 mm) Deep Pro Series Wall Hoods
PRO SERIES WALL
HOODS
The Pro Series wall hoods are recom-
mended for use with all Wolf cooking
appliances, with a few exceptions for
the 22" (559 mm) deep hoods. All
Pro Series wall hoods are available in
classic stainless steel. (R) models
include mounting holes for the
optional decorative rail.
22" (559 mm) Deep Wall Hoods
Available in 30" (762 mm), 36"
(914 mm), 42" (1067 mm) and 48"
(1219 mm) widths. (I) models include
a 600 cfm internal blower. These
hoods are not recommended for use
with Wolf dual fuel range, gas range
and rangetop models with a char-
broiler or griddle.
NOTE: Rear discharge is only applica-
ble on 22" (559 mm) wall hoods
(excluding W302210I and W362210I)
and 24" (610 mm) wall hoods used
with a WBLOWER-120INT (804702)
or any Wolf remote blower.
WBLOWER-90INT (805086) is not for
use in rear discharge applications.
24" (610 mm) Deep Wall Hoods
Available in 30" (762 mm), 36"
(914 mm), 42" (1067 mm), 48"
(1219 mm), 54" (1372 mm), 60"
(1524 mm) and 66" (1676 mm)
widths.
27" (686 mm) Deep Wall Hoods
Available in 30" (762 mm), 36"
(914 mm), 42" (1067 mm), 48"
(1219 mm), 54" (1372 mm), 60"
(1524 mm) and 66" (1676 mm)
widths.
These illustrations of the three Pro
Series wall hood sizes give you overall
dimensions, while the installation
dimensions are provided in the
illustration on the following page.
18"
(457 mm)
9
1
/2
"
(241 mm)
24"
(610 mm)
12"
(305 mm)
10" (254 mm)
ROUND TRANSITION
30", 36", 42", 48",
54", 60" and 66"
(762, 914, 1067, 1219, 1372,
1524 and 1676 mm)
27" (686 mm) Deep Pro Series Wall Hoods
27"
(686 mm)
18"
(457 mm)
12"
(305 mm)
9
1
/2
"
(241 mm)
10" (254 mm)
ROUND TRANSITION
30", 36", 42", 48",
54", 60" and 66"
(762, 914, 1067, 1219, 1372,
1524 and 1676 mm)
22" (559 mm) Deep Low Profile Wall Hoods
10"
(254 mm)
22"
(559 mm)
12"
(305 mm)
7
1
/2
"
(
191 mm
)
8" (203 mm)
ROUND TRANSITION
30", 36", 42" and 48"
(762, 914, 1067 and 1219 mm)
Pro Series Wall Hoods Features
• Classic stainless steel finish
• Recessed controls
• Halogen lighting with night-light
• 16-gauge stainless steel shell
• Hand finished with continually
welded seams
• Stainless steel enclosed liner
• Stainless steel baffle filters
• Internal or remote blower option
• Heat Sentry feature (automati-
cally adjusts blower speed)
• Heat lamps – 27" (686 mm) deep
wall hoods only
• Top or rear discharge with certain
models
• Variable speed ventilator control
• Transition with backdraft damper
included
• Optional decorative rail assembly
in stainless, platinum, brass or
copper finish
• Optional 6" (152 mm) and 12"
(305 mm) duct covers
• UL approved for covered outdoor
application
P RO S ERIES V ENTILATION