Specifications

ICB Sealed Burner Rangetop (ICBSRT) Series
ICB Sealed Burner Rangetop (ICBSRT) Series
Wiring Diagrams
7-2
#820376 - Revision A - October, 2011
SW1
SW2
SW3
SW4 SW5 SW6
LINE NOT USED
NEUTRAL
GND
GAS VALVE NOT USED NOT USED GAS VALVE
S1
S2
S3
S4
CNTRL, IGNTR, VALVE 4 PT
LEFT REAR
S1
LEFT FRONT
S2
RIGHT REAR
S3
RIGHT FRONT
S4
LEFT REAR
SWITCH SW1
LEFT FRONT
SWITCH SW2
RIGHT FRONT
SWITCH SW4
RIGHT REAR
SWITCH SW3
10 VDC SOLENOID
SPARKER WIRE SPARKER WIRE
SPARKER WIRE SPARKER WIRE
3-GRN/YLW
4-GRN/YLW
2-WHT
1-BLACK
6-ORANGE
7-ORANGE
14-BLACK
8-BLUE
9-BLUE
10-BLUE
11-BLUE
5-WHITE
15-BLACK
16-BLACK 17-BLACK
18-BLACK
CAPPED CONNECTOR
GROUND
N IN L1 IN
230V 50 CYCLES
WIRING SCHEMATIC Model: ICBSRT304
- This wiring information is provided for use by qualified service personnel only.
- Disconnect appliance from electrical supply before beginning service.
- Be sure all grounding devices are connected when service is complete.
- Failure to observe the above warnings may result in severe electrical shock.