Specifications

9
I N S TA L L AT I O N I N S T R U C T I O N S
ELECTRICAL SHOCK HAZARD—
Plug into a grounded earth pin on plug
electrical outlet.
Do not remove ground prong.
D
o not use an adapter.
Failure to follow these instructions can
result in electric shock, fire or death.
Electronic ignition systems operate within
wide voltage limits, but proper ground and
polarity are necessary. In addition to checking
that the electrical outlet provides 240 V AC
power and is correctly grounded, the outlet
must be checked by a qualified electrician to
see if it is wired with correct polarity.
A wiring diagram covering the control circuit
f
or the Wolf multi-function cooktop model can
be found on page 13.
If an electrical outlet is not available, it is the
obligation of the customer to have a properly
grounded, 3-pin electrical outlet installed by a
qualified electrician.
IMPORTANT NOTE: If codes permit and a
separate ground wire is used, it is recom-
mended that a qualified electrician determine
that the ground path is adequate.
IMPORTANT NOTE: Check with a qualified
electrician if you are not sure whether the
cooktop is properly grounded.
IMPORTANT NOTE: Do not ground to a gas
pipe.
A 240 V AC, 10 Amp electrical supply is
required. A time-delay fuse or circuit breaker is
recommended. It is recommended that a
separate circuit serving only this appliance be
provided.
E L E C T R I C A L REQ U IR E ME N TS
WOK installation_Mono 1.0:Intl Multi-F CT Install 31/3/10 1:26 PM Page 9