INSTALLATION GUIDE E Series Built-In Ovens
Contents Important Note Wolf E Series Built-In Ovens . . . . . . . . . . . . . . . . . . . . 3 To ensure the safe and efficient use of Wolf equipment, please take note of the following types of highlighted information throughout this guide: E Series Oven Specifications . . . . . . . . . . . . . . . . . . . . 4 E Series Oven Installation . . . . . . . . . . . . . . . . . . . . . . 15 Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wolf E Series Built-In Ovens 3 wolfappliance.com/specs E Series Oven Installation IMPORTANT NOTE: This installation must be completed by a qualified installer or Wolf authorized service center technician. Read this entire installation guide prior to installation and save for the local inspector’s reference. The homeowner should keep this installation guide for future reference. This appliance must be installed in accordance with National Electrical Codes, as well as all state, municipal and local codes.
E Series Oven Specifications 4 Overall Dimensions E SERIES SINGLE OVEN Model SO30-2U/S shown 1" (25)* TOP VIEW RIGHT SIDE VIEW 11/4" (32) 1 7/8" (48) CONDUIT CHANNEL 27 7/8" 27 1/16" 23 3/4"* (708) (687) (603) 28 1/4" 1 7/8" (718) (48) 29 7/8" 2 5/8"* (759) (67) 23 3/4" (603) BEHIND FRAME 22" OPEN OVEN DOOR (559) *For black glass model, increase dimension by 1/4" (6).
E Series Oven Specifications 5 wolfappliance.com/specs E Series Built-In Ovens For ease of installation, Wolf recommends using a 33" (838) wide cabinet with the E series oven. The installation opening must have a flat, level base to support the oven. The single oven requires a minimum base support of 250 lbs (115 kg). The double oven requires a minimum base support of 400 lbs (180 kg).
E Series Oven Specifications 6 Electrical Requirements IMPORTANT NOTE: Unless you are using cabinets deeper than 24" (610) for a standard installation or 25" (635) for a flush inset installation, it is recommended that the electrical supply for the oven be placed in an adjacent cabinet within reach of the conduit. Choose the electrical location shown in the illustrations on the following pages that best suits your installation.
E Series Oven Specifications 7 wolfappliance.com/specs E Series Single Oven STANDARD INSTALLATION DIMENSION WILL VARY* 5" (127) 24" (610) min OPENING DEPTH E 4" 27 3/16" (102) (691) OPENING HEIGHT 36" (914) 28 1/2" (724) OPENING WIDTH FLOOR TO COUNTERTOP 4 3/4" (121) TYPICAL* SIDE VIEW FRONT VIEW *Dimension must accommodate height of oven trim. NOTES: Location of electrical supply within opening may require additional cabinet depth. Dashed line represents profile of unit.
E Series Oven Specifications 8 E Series Double Oven STANDARD INSTALLATION E 24" (610) min OPENING DEPTH 49 5/8" (1260) OPENING HEIGHT 28 1/2" (724) OPENING WIDTH 67" (1702) TYPICAL* 4" (102) 5" (127) E E SIDE VIEW FRONT VIEW *Dimension must accommodate height of oven trim. NOTES: Location of electrical supply within opening may require additional cabinet depth. Dashed line represents profile of unit.
E Series Oven Specifications 9 wolfappliance.com/specs E Series Single Oven FLUSH INSET INSTALLATION TOP VIEW 1" (25)* 24 3/4"* (629) min FLUSH INSET DEPTH SIDE CLEATS 30 3/8" (772) min FLUSH INSET WIDTH 7/8" (22) TOP CLEAT 27 3/16" (691) OPENING HEIGHT 28 1/2" (724) min FLUSH INSET HEIGHT 28 1/2" (724) OPENING WIDTH 1" (25) 4" SIDE CLEATS (102) 7/16" (11) 5" BOTTOM CLEAT (127) E E SIDE VIEW *For black glass model, increase dimension by 1/4" (6). NOTES: Minimum base support 250 lbs (113 kg).
E Series Oven Specifications 10 E Series Double Oven FLUSH INSET INSTALLATION TOP VIEW 1" (25)* 24 3/4"* (629) min FLUSH INSET DEPTH SIDE CLEATS 30 3/8" (772) min FLUSH INSET WIDTH 7/8" (22) TOP CLEAT 49 5/8" (1260) OPENING HEIGHT 50 15/16" (1294) min FLUSH INSET HEIGHT 28 1/2" (724) OPENING WIDTH 1" (25) SIDE CLEATS 67" (1702) TYPICAL 4" (102) 7/16" (11) 5" BOTTOM CLEAT (127) E E SIDE VIEW *For black glass model, increase dimension by 1/4" (6). NOTES: Minimum base support 400 lbs (181 kg).
E Series Oven Specifications 11 wolfappliance.com/specs E Series Single Oven STANDARD INSTALLATION WITH MICROWAVE AND WARMING DRAWER 11/2" (38) MICROWAVE OPENING min E 24" (610) min OPENING DEPTH 27 3/16" (691) 28 1/2" (724) OVEN OPENING WIDTH 4" (102) 5" ANTI-TIP (127) E E 9 1/8" (232) 3/4" (19) min 28 5/8" (727) WARMING DRAWER OPENING WIDTH SIDE VIEW NOTES: Minimum base support for oven 250 lbs (113 kg). Location of electrical supply within opening may require additional cabinet depth.
E Series Oven Specifications 12 E Series Single Oven FLUSH INSET INSTALLATION WITH STANDARD MICROWAVE AND WARMING DRAWER TOP VIEW 1" (25)* 24 3/4"* (629) min FLUSH INSET DEPTH SIDE CLEATS 30 3/8" (772) min FLUSH INSET WIDTH 11/16" (17) TOP CLEAT 17" (432) OPENING HEIGHT 181/2" (470) FLUSH INSET HEIGHT 271/2" (699) STANDARD MICROWAVE OPENING WIDTH E 111/16" (43) CLEAT 27 3/16" (691) OPENING HEIGHT 28 1/8" (714) min FLUSH INSET HEIGHT 28 1/2" (724) E SERIES OVEN OPENING WIDTH 1" (25) 4" CLEAT 91
E Series Oven Specifications 13 wolfappliance.
E Series Oven Specifications 14 E Series Single Oven FLUSH INSET INSTALLATION WITH DRAWER MICROWAVE AND WARMING DRAWER TOP VIEW 24 3/4"* 11/4" (32)* FOR MICROWAVE (629) min 1" (25)* FOR OVEN FLUSH INSET AND WARMING DEPTH DRAWER SIDE CLEATS 30 3/8" (772) min FLUSH INSET WIDTH 7/8" (22) TOP CLEAT 27 3/16" (691) OPENING HEIGHT 28 1/2" (724) E SERIES OVEN OPENING WIDTH 28 1/8" (714) min FLUSH INSET HEIGHT 1" (25) 4" 9/16" (14) CLEAT 5" (127) E E 14 3/4" (375) 15 3/8" OPENING HEIGHT (391) FLUSH IN
E Series Oven Installation 15 wolfappliance.com/specs Install the Oven IMPORTANT NOTE: Before moving the oven, protect any finished flooring to avoid damage to the floor. Move the oven into position near the installation opening. Remove and discard packing materials. Remove the box containing oven components found in each oven cavity. The oven is very heavy—use caution when lifting. Do not lift the oven by the door handle. This will damage the oven door and hinges.
E Series Oven Installation 16 Install the Oven POSITION THE OVEN MOUNT OVEN TO CABINETRY Carefully lift the oven up to the opening. Resting the oven on the cabinet base support, slide the oven into the opening until it is approximately 6" (152) from full insertion. Make sure the conduit slides through the opening of the base support as the oven is moved into place. Once the oven is fully inserted into the opening, locate the mounting holes on the oven side trim.
E Series Oven Installation 17 wolfappliance.com/specs Verify Oven Operation Unpack the box containing the oven components found in each oven cavity. Install the oven rack guides onto the shoulder screws located on the interior side walls of the oven. Slide the oven racks onto the rack guides and place the broiler pan in the oven. Before operating the oven, be sure to read the entire use & care guide included with the oven for important safety, operating and warranty information.
Service Information 18 Troubleshooting Service Information IMPORTANT NOTE: If the E series oven does not operate properly, follow these troubleshooting steps: If service is necessary, maintain the quality built into your E series oven by contacting Wolf factory certified service. • Verify that electrical power is being supplied to the oven. For the name and number of Wolf factory certified service nearest you, check the contact & support section of our website, wolfappliance.
The information and images in this guide are the copyright property of Wolf Appliance, Inc. Neither this guide nor any information or images contained herein may be copied or used in whole or in part without the express written permission of Wolf Appliance, Inc. ©Wolf Appliance, Inc. all rights reserved. Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service marks of Wolf Appliance, Inc.
WOLF APPLIANCE, INC. P. O. BOX 44848 MADISON, WI 53744 819066 REV-A 7/ 2011 WOLFAPPLIANCE.COM 800.222.
