Design Guide

wolfappliance.com | 67
ELECTRICAL REQUIREMENTS
Installation must comply with all applicable electrical codes.
Locate the electrical supply as shown in the illustrations on
the following pages. A separate circuit servicing only this
appliance is required.
ELECTRICAL REQUIREMENTS
INDUCTION
Electrical Supply grounded 3-wire, 240/208 VAC, 60 Hz
Conduit flexible 4' (1.2 m)
ELECTRIC
Electrical Supply grounded 3-wire, 240 VAC, 60 Hz
Electrical Supply (208 V) grounded 3-wire, 208 VAC, 60 Hz
Conduit flexible 4' (1.2 m)
SERVICE
24" Induction 30 amp dedicated circuit
30" Induction/Electric 40 amp dedicated circuit
36" Induction/Electric 50 amp dedicated circuit
Induction/Electric Cooktops
Planning Information
A minimum 2" (51) is required from the bottom of the
cooktop to combustible materials.
Contemporary induction and electric cooktops can be
mounted flush with the top of the countertop, or as a
frameless standard installation sitting on top of the coun-
tertop surface. If the cooktop is to be mounted flush with
the countertop, a recessed area surrounding the cooktop
cutout must be provided.
IMPORTANT NOTE: Flush mount installations are intended
for granite, solid surface, or stone countertop surfaces
only.