installation guide

wolfappliance.com | 9
TRANSITION
For internal blowers, remove the existing 10" (254) round
transition. Refer to the illustration below.
For in-line and remote blowers with a front discharge, leave
the 10"
(254) round transition in place.
For in-line and remote blowers with a rear discharge,
remove the 10"
(254) round transition from the front and the
solid cover from the rear of the downdraft, then reinstall the
transition on the rear and the solid cover on the front.
INSTALLATION
Remove transition
Installation
DOWNDRAFT
1 Install the top mounting brackets using the #4 sheet
metal screws provided. Refer to the illustration below.
2 Install the lower mounting brackets using the #8 x 32
sheet metal screws provided, but do not tighten. The
brackets need to be adjusted once the downdraft is
placed in the opening. Refer to the illustration below.
Top mounting bracket Bottom leveling bracket