installation guide

wolfappliance.com | 11wolfappliance.com | 11
Installation
IN-LINE/REMOTE BLOWER
1 Insert the electrical supply (Romex) from the in-line or
remote blower through the opening on the downdraft
and secure using an approved cord strain relief.
2 Connect hot to brown, neutral to blue, and ground to
green. Refer to the illustrations below.
WIRING
COVER
BLUE
BROWN
NEUTRAL
GROUND
FROM
BLOWER
HOT
POWER
CORD
Wiring location In-line/remote blower wiring
INSTALLATION
COUNTERTOP MOUNTING
Place the downdraft in the opening, then secure the bottom
brackets to the cabinet base using the wood screws pro-
vided. Once the brackets are secure, tighten the existing
lower bracket screws. Refer to the illustration below.
Secure the top mounting brackets to the countertop using
the wood screws provided. For solid surface countertops,
silicone may be used but is not provided.
Once the top is secure, install the undercounter brackets
using the screws provided, then install the side covers.
Refer to the illustration below.
MOUNTING
SCREW
COVER
Countertop mounting Cover installation